Raspberry Pi ILI9341 TFT
From ProjectPages
Contents
Introduction
The Adafruit board brings includes a chip that holds reset low when the voltage is below a threshold. The Adafruit chip is the APX803 from Mouser. I have chosen to use the ON Semiconductor MAX809, which is very similar. I have also used the STM1818, which works well.
The Board
- ILI9341 TFT Touch Screen
ILI9341 TFT Touch Screen - Top
ILI9341 TFT Touch Screen - Underside
MAX809 3-Pin Microprocessor Reset Monitor
 |
|
| Pin Diagram | Typical Application |
3.06V ±2% Voltage Detector Supervisor STM1818TWX7F Active Low SOT-23
 |
|
| Pin Diagram | Typical Application |
Connections
| WiringPi | GPIO | Pi | ILI9341 | ILI9341 | Pi | GPIO | WiringPi |
|---|---|---|---|---|---|---|---|
| 3V3 | 1 | 8 - LED | 2 | 5V | |||
| 8 | GPIO2(SDA) | 3 | 4 | 5V | |||
| 9 | GPIO3(SCL) | 5 | 6 | GND | |||
| 7 | GPIO4(GPCLK0) | 7 | 8 | GPIO14(TXD) | 15 | ||
| GND | 9 | 10 | GPIO15(RXD) | 16 | |||
| 0 | GPIO17 | 11 | 12 | GPIO18 (PWM0) | 1 | ||
| 2 | GPIO27 | 13 | 14 | GND | |||
| 3 | GPIO22 | 15 | 16 | GPIO23 | 4 | ||
| 3V3 | 17 | 1 - VCC | 18 | GPIO24 | 5 | ||
| 12 | GPIO10(MOSI) | 19 | 6 - MOSI | 2 - GND | 20 | GND | |
| 13 | GPIO9(MISO) | 21 | 9 - MISO | 5 - D/C | 22 | GPIO25 | 6 |
| 14 | GPIO11(SCLK) | 23 | 7 - SCLK | 3 - CS | 24 | GPIO8(CE0) | 10 |
| GND | 25 | 26 | GPIO7(CE1) | 11 | |||
| GPIO0(ID_SD) | 27 | 28 | GPIO1(ID_SC) | ||||
| GPIO5 | 29 | 30 | GND | ||||
| GPIO6 | 31 | 32 | GPIO12(PWM0) | ||||
| GPIO13(PWM1) | 33 | 34 | GND | ||||
| GPIO19(MISO) | 35 | 36 | GPIO16 | ||||
| GPIO26 | 37 | 38 | GPIO20(MOSI) | ||||
| GND | 39 | 40 | GPIO21(SCLK) |
Links
- Adafruit PiTFT Schematic
- Adafruit PiTFT - 2.8" Touchscreen Display for Raspberry Pi
- ISS Picture Frame
- Pi Cart Wall
- MAX809 Series, MAX810 Series - Very Low Supply Current 3-Pin Microprocessor Reset Monitors
- Installing SDL on Raspberry Pi for GUIslice
- How do I let an SDL app (not running as root) use the console
- Permissions on /dev entries
- SDL setup on Raspbian?
- How to setup Bluetooth on a Raspberry Pi 3
- Connect Bluetooth Keyboard at boot
