Raspberry Pi ZigBee Gateway
From ProjectPages
Connections
Raspberry Pi Zero
| GPIO | Pi | Mesh Bee | Mesh Bee | Pi | GPIO |
|---|---|---|---|---|---|
| 3V3 | 1 | 1 - 3V3 | 2 | 5V | |
| GPIO2 | 3 | 4 | 5V | ||
| GPIO3 | 5 | 10 - GND | 6 | GND | |
| GPIO4 | 7 | 3 - Rx1 | 8 | GPIO14 - Tx | |
| GND | 9 | 2 - Tx1 | 10 | GPIO15 - Rx | |
| GPIO17 - RTS | 11 | 12 | GPIO18 | ||
| GPIO27 | 13 | 14 | GND | ||
| GPIO22 | 15 | 16 | GPIO23 | ||
| 3V3 | 17 | 18 | GPIO24 | ||
| GPIO10 | 19 | 20 | GND | ||
| GPIO9 | 21 | 22 | GPIO25 | ||
| GPIO11 | 23 | 24 | GPIO8 | ||
| GND | 25 | 26 | GPIO7 | ||
| ID_SD | 27 | 28 | ID_SC | ||
| GPI05 | 29 | 30 | GND | ||
| GPI06 | 31 | 32 | GPI12 | ||
| GPI13 | 33 | 34 | GND | ||
| GPI19 | 35 | 36 | GPIO16 - CTS | ||
| GPI26 | 37 | 38 | GPIO20 | ||
| GND | 39 | 40 | GPIO21 |
Mesh Bee
| Mesh Bee | Mesh Bee | ||||
|---|---|---|---|---|---|
| 3V3 | 1 | PI - 3V3 | 20 | SDA - D17 | |
| D14 - Tx1 | 2 | PI 10 - GPIO15 - Rx | 19 | SCL - D16 | |
| D15 - Rx1 | 3 | PI 8 - GPIO14 - Tx | 18 | AD3 - D0 | |
| DO1 - SPIMISO | 4 | Switch to GND | 17 | AD4 - D1 | |
| /RST | 5 | Switch to GND | FTDI RTS | 16 | RTS0 out - D13 |
| D11- RSSI | 6 | LED | LED | 15 | ASSOC - D10 |
| DO0 - SPICLK | 7 | FTDI TX | 14 | Rx0 - D7 | |
| D18 - SPIMOSI | 8 | 13 | ON/SLEEP D9 | ||
| VREF | 9 | FTDI CTS | 12 | CTS0 in - D12 | |
| GND | 10 | PI GND | FTDI RX | 11 | Tx0 - D6 |
Links
This shows how to swap the main serial port with the mini. The mini is now valid for bluetooth
